
1. The Boxes Are Here. Now What?
The truck pulls away. The pallets are stacked in your warehouse. You sign the delivery receipt, and the driver leaves.
Now what?
Most buyers open a box, plug in a lamp, confirm it turns on, and call it done. That is a mistake. The first 48 hours after delivery is your final window of leverage. After that, the supplier can argue the defects happened in transit or in your warehouse. Your claim becomes a negotiation instead of a right.
This guide covers seven checks to perform within 48 hours of receiving your UV lash light shipment. These are the checks that catch problems before they reach your customers—and before your leverage disappears.
If you have not yet selected a manufacturer, see our manufacturer selection guide for what to verify before you order.
2. Check 1: Quantity and Documentation
Before you open a single box, verify the paperwork.
2.1 What to Check
| Item | What to Verify |
|---|---|
| Packing list | Matches your purchase order exactly |
| Quantity | Count cartons against the packing list |
| Model numbers | Match what you ordered |
| Certifications | Copies of IEC 62471, CE, RoHS reports included |
| Test reports | Batch QC report and wavelength test data |
2.2 Why This Matters
If the packing list says 500 units and you received 480, you need to know immediately—not after you have sold the inventory. If the certifications do not match the model you ordered, you have a customs risk on your hands.
Document everything. Photograph the packing list, the cartons, and any discrepancies. This is your evidence if you need to file a claim.

3. Check 2: Packaging and Accessories
Open one carton from each pallet—not just the top layer.
3.1 What to Check
Box condition: Crushed corners, water damage, or punctures
Internal packaging: Foam, bubble wrap, or molded inserts protecting the product
Accessories: Power adapter, USB cable, foot pedal, manual, warranty card
Language: Manuals and packaging in the correct language for your market
Branding: Logo placement, spelling, and color accuracy
3.2 Common Issues
Missing accessories (foot pedals are often forgotten)
Wrong plug type for your target market
Manuals in the wrong language
Logo misprinted or misspelled
These are not minor issues. A missing foot pedal makes the product unusable. A manual in the wrong language creates customer complaints. Catch them now.
We provide complete accessory kits and market-specific packaging for every order.
4. Check 3: Visual Inspection
Inspect a sample of units from different cartons—not just the first box.
4.1 What to Look For
| Area | Defect to Check |
|---|---|
| Housing | Scratches, scuffs, dents, uneven finish |
| Lens | Dust, scratches, cloudiness, adhesive residue |
| Buttons | Misaligned, loose, or unresponsive |
| Ports | Loose USB-C, bent pins, debris inside |
| Gooseneck | Kinks, stiffness, inability to hold position |
| Logo | Misaligned, faded, or misspelled |

4.2 How Many to Inspect
For orders under 500 units, inspect at least 10%—or 20 units, whichever is greater. For orders over 500 units, use AQL sampling (AQL 2.5 for major defects, AQL 4.0 for minor).
If you find more than 2–3% of units with cosmetic defects, inspect more. The defect rate in your sample is likely the defect rate in the batch.
5. Check 4: Functional Testing
Every unit you inspect should be powered on and tested.
5.1 Basic Function Tests
| Test | What to Do |
|---|---|
| Power on/off | Press the power button 5 times—does it respond every time? |
| Foot pedal | Press the pedal 10 times—does it activate the lamp every time? |
| Timer presets | Cycle through 1s, 3s, 5s—do they work? |
| Luminosité | Adjust through the full range—does it respond smoothly? |
| Charging | Plug in USB-C—does the charging indicator light up? |
| Gooseneck | Adjust through full range—does it hold position? |
5.2 The “10-Minute Burn-In” Test
Run each inspected unit for 10 minutes continuously. This catches:
Overheating issues
Driver instability
Premature LED failure
A lamp that works for 30 seconds but fails after 10 minutes is a defect waiting to happen.
5.3 What to Record
For each unit tested, record:
Unit serial number (if available)
Test result (pass/fail)
Any defects observed
This data becomes your batch quality record—and your evidence if you need to file a claim.
Our UV lash lights are burn-in tested before shipment to catch early failures.
6. Check 5: Wavelength and Irradiance Verification
This is the most critical check—and the one most buyers skip.
6.1 Why It Matters
A UV lash light can power on, look bright, and still emit the wrong wavelength or insufficient irradiance. It will appear to work—until your customers complain about retention.
6.2 How to Test
| Test | Équipement | Ce qu'il faut vérifier |
|---|---|---|
| Longueur d'onde | Spectrometer | Peak wavelength within 395–405nm ±5nm |
| Irradiance | UV meter | 50–200 mW/cm² at 2–5 cm working distance |
| Beam focus | Visual check | Tight, bright spot—not diffuse floodlight |
| Scintillement | Phone camera | No visible bands or lines in video mode |

6.3 What to Do If You Do Not Have Equipment
If you do not have a spectrometer or UV meter, consider:
Renting equipment for the inspection
Hiring a local lab to test a sample
Asking the supplier for batch test data (and verifying it with a spot check)
According to UV safety certification standards, wavelength verification is the single most important performance check for UV lash lights. A lamp that fails this check should be rejected.
7. Check 6: Consistency Across the Batch
One good unit does not mean the batch is good. Check for consistency.
7.1 What to Compare
Test 5–10 units from different cartons. Compare:
Cure time (use the same adhesive and conditions)
Brightness (visual comparison)
Wavelength (if you have equipment)
Build quality (alignment, finish)
7.2 Red Flags
Some units cure in 1 second, others take 3 seconds
Some units are noticeably brighter or dimmer
Some units have visible cosmetic differences
Some units feel heavier or lighter
Inconsistency is a sign of poor process control. If your sample shows inconsistency, the entire batch is suspect.
8. Check 7: The “Golden Sample” Comparison
Before production began, you should have approved a golden sample—a unit that represents the exact specifications you expect.
8.1 What to Compare
| Fonctionnalité | Golden Sample vs. Production Unit |
|---|---|
| Longueur d'onde | Should match exactly |
| Irradiance | Should match ±10% |
| Housing finish | Should match color, texture, and quality |
| Poids | Should feel identical |
| Accessories | Should match exactly |
| Emballage | Should match approved design |
8.2 If It Does Not Match
If the production units differ from the golden sample in any meaningful way, that is a defect. Document the difference with photos and measurements. Contact the supplier immediately.
The golden sample is your contract reference. If the supplier cannot meet it, they have breached the agreement.

9. What to Do When You Find Defects
Finding defects is not failure. Accepting them is.
9.1 Document Everything
Photograph every defect
Record quantities and serial numbers
Save the packaging and accessories
Keep the golden sample for comparison
9.2 Contact the Supplier Within 48 Hours
The 48-hour window is not arbitrary. It is the point at which you can still argue the defect existed before shipment. After that, the supplier can claim the defect happened in your warehouse.
9.3 Negotiate a Resolution
| Defect Severity | Resolution |
|---|---|
| Critical (safety, function) | Reject entire batch, request replacement |
| Major (functional issues) | Reject affected units, negotiate discount or replacement |
| Minor (cosmetic) | Accept with discount, or request replacement for excessive defects |
9.4 Hold the Balance Payment
If you have not paid the balance yet, this is your leverage. Do not release payment until the defects are resolved.
10. Verdict final
| Check | What to Do | Time Required |
|---|---|---|
| 1. Quantity and documentation | Count cartons, verify packing list and certifications | 30 minutes |
| 2. Packaging and accessories | Inspect cartons from each pallet | 30 minutes |
| 3. Visual inspection | Inspect 10%+ of units for cosmetic defects | 1 heure |
| 4. Functional testing | Power on/off, foot pedal, timer, burn-in | 2 hours |
| 5. Wavelength and irradiance | Test with spectrometer and UV meter | 1–2 hours |
| 6. Batch consistency | Compare 5–10 units across cartons | 30 minutes |
| 7. Golden sample comparison | Compare against approved sample | 30 minutes |
The first 48 hours after delivery is your last window of leverage. Use it.
Inspect the shipment. Test the critical parameters. Document everything. Contact the supplier immediately if you find defects.
Your customers will never see your inspection report. But they will see the quality of the product. And that is what matters.
Article connexe sur les extensions de cils UV
- Quality control checks before UV lash light shipment
- How to manage your UV lash light supplier relationship
- UV lash lamp maintenance for reliable curing performance
Un message de Seminglight – We provide golden samples, batch QC reports, and full documentation for every UV lash light order. Lampes à cils UV with verified quality. Découvrez notre collection de faux cils UV ou nous contacter for wholesale pricing and QC documentation.
